Tamiya Panel Line Accent Colour Paint

Product Information

Once these clear coats have fully dried in an hour or so the Tamiya Panel Line Accent Color can be safely added. It’s critical to let them dry or you risk rubbing the Tamiya pigment into the unhardened clear coat. Wing half with 3 sheens

As you can see in the picture there’s quite a difference between the two color tones. The lighter looks as though rain had collected then dried while the softer brown has that earthy look. The point is you can have multiple shades and not be restricted to one. Tail with two cups

Tamiya Masking Tape Holder - Holds 6, 10 and 18mm wide rolls with Anti-Slip Rubber Feet - Easy to swap out with Magnetic Top - 3D Printed Lastly, I took the time to scribe the panel lines and rivet the rudder of the B-17 Flying Fortress. Then it was primed and sprayed light sky grey and given a mat clear coat. After the prep work had dried, I used the brown color to accentuate my detail work.

This picture shows what can expected on flat paint. Notice how the brown has flowed down the panel lines? centered on flat blue With the wing part in full view, you can clearly see that uncoated wing tip area refused to give up all the pigment, leaving a brown hue. Notice the difference below on the clean aileron? Once again, it all boils down to which look you want. Be cautious, rubbing too much on bare paint will remove some of it. full blue wing part Let’s begin with the basics. Here’s the rudder of a 1/48 B-17 Flying Fortress. Some of the models Sunward Hobbies sell have coloured plastic parts, so if you simply want to add some depth and detail to your model here’s what to do.Here’s an added tip, if you’re doing the entire model, or a good portion of it, I suggest using an eye dropper or pipette and put 5 or 6 drops in a small cup. Using either the cap brush or your own you can mix it more conveniently instead of shaking the bottle every time it’s needed. USB Programmed board with soldered 1.3" oled screen for DIY project computer cpu gpu temp, framerate, load monitor, ram usage, and indicator

When you’ve completed remove the bulk of the excess there will be some residue. Now you may opt to leave this as a weathering effect, clean it up a little as a “post shade” or get rid of it entirely. It all depends on the look you’re after. Tail and smudged grey wash with blue thumb This color was added to Panel Line Accent Color Series; it is ideal for highlighting panel lines and other details to give your model a more realistic depth. ★Dark Brown color is useful for applying weathering effects on tank models. ★1 bottle contains 40cc enamel paint. The bottle's cap features a brush for easy application. Use the same method for removing the excess as explained above, yet for raised bolts and rivets a fine brush will allow you to get in between those without removing the needed accent color. Cup on part with brush Lining Like a Pro 】　These enamel paints are ideal for highlighting panel lines and other details to give your model a more realistic depth. The paint has been pre-diluted into the ideal viscosity and can be easily applied into crevasses such as panel lines with the brush on the bottle cap. Once dried, any excess may be cleaned up by using enamel thinner. (Bottle contains 40ml)

Reviewed by H.G. Barnes

Apply over base coat of lacquer or acrylic paint. Accent Color paints may damage underlying base coat. Test before applying onto the model. Next, I’ve sprayed the part with AK Interactive Real Colors Air Superiority Blue, masked and sprayed semi gloss then gloss clear coat. Painted and varnished shot at a 45 angle